Eurofins Toys & Hardlines Monthly Bulletin (March 2026)

Date

Title

25/02/2026

Packaging and Packaging Waste – exemptions from the reuse obligations for plastic wrappings and straps (delegated act)

This possible delegated act would establish exemptions from the Packaging and Packaging Waste Regulation’s (PPWR) reuse obligations for plastic wrappings and straps. The status of this initiative is expected to be adopted by the Commission soon.

17/03/2026

Amendment of the Regulation on the functioning of the information system

Establishing new functions in the Information System pursuant to Article 33 and Annex III of Regulation (EU) 2023/1115, including: - submission of simplified declarations by micro and small primary operators and assignment of a declaration identifier - access for downstream operators and traders, particularly non-SMEs - contingency arrangements in the event of unavailability of the functionalities of the information system.

The status of this initiative is in preparation.

Date

Reference

Title

23/02/2026

2026/0090/DK (Denmark)

Order on certain requirements concerning packaging, extended producer responsibility for packaging and other waste collected with packaging waste

The amendments relate to the implementation of national measures by the Government to reduce companies’ administrative and financial costs associated with producer responsibility for packaging.

02/03/2026

2026/0097/LU (Luxembourg)

Amendments to the draft law amending the legislation relating to waste, packaging and the impact of certain plastic products on the environment

These government amendments concern the draft law amending:

1.     the amended law, of 21 March 2012, relating to waste;

2.     the amended law, of 21 March 2017, relating to packaging and packaging waste;

3.     the law, of 9 June 2022, relating to the reduction of the impact of certain plastic products on the environment (hereinafter the ‘draft law’).

This draft law aims to align certain provisions with the applicable European standards, to improve their structuring and to simplify their reading.

04/03/2026

2026/0109/FI

 (Finland)

Proposal for Government Decrees on compensation paid by producers of certain plastic products to municipalities in 2026–2028 and on amendments to Section 1 and Annexes 1 and 3 of the Government Decree on certain plastic products

The purpose of the Decrees is to lay down provisions supplementing the Waste Act (646/2011) that would determine the compensation paid by producers of certain single-use plastic products and nicotine pouches to municipalities, and on the general producer liabilities of producers of nicotine pouches. The amendment to the Decree on certain plastic products is also part of the implementation of the Packaging and Packaging Waste Regulation (EU) 2025/40.

09/03/2026

G/TBT/N/EU/1195

(Europe)

Commission  Implementing  Decision  laying  down  rules  for  the  application  of Directive  (EU)  2019/904  of  the  European  Parliament  and  of  the  Council  as  regards  the calculation,  verification  and  reporting  of  data  on  recycled  plastic  content  in  single-use plastic   beverage   bottles   and   repealing   Commission   Implementing   Decision  (EU) 2023/2683.

The implementing decision lays down rules for the calculation, verification and reporting of recycled content in PET bottles. EU Member States will have to apply these rules to demonstrate compliance with the recycled plastic content targets set in Article 6(5) of the Single-Use Plastics Directive (EU) 2019/904.

1 January 2026

≤ 90 ppm (all in-scope products)

1 January 2027

Intentionally added lead prohibited

1 January 2030

≤ 50 ppm (aluminium & brass pots, pans, and components)

1 January 2034

≤ 20 ppm (aluminium & brass pots, pans, and components)

Reference

Title

F2050-19(2026)

Standard Consumer Safety Specification for Hand-Held Infant Carriers

F3512-21(2026)

Standard Test Method for Evaluating Wind Safety and Durability of Market Umbrellas

Food Contact

1 

GB/T 25435-2026

Filtration board for food processing

This document defines terms and definitions related to filtration board for food processing, provides product classifications, specifies technical requirements, inspection rules, marking, packaging, transportation, and storage, and describes corresponding test methods.

This document applies to the production, inspection, and sale of filtration boards for food processing.

2026-08-01

GB/T 25435-2010, GB/T 25437-2010

2 

GB/T 29606-2026

Stainless steel vacuum flask

This document specifies requirements for stainless steel vacuum flasks (bottles, kettle), including stainless steel materials, volume tolerances, and thermal retention performance. It describes corresponding test methods, establishes inspection rules, and sets requirements for marking, labelling, instruction manuals, packaging, transportation, and storage. It also provides product classifications and specifications.

This document applies to the production, inspection, and sale of stainless steel vacuum flasks (bottles, kettle) and similar utensils intended for food contact (hereinafter referred to as “products”).

2027-02-01

GB/T 29606-2013

3 

GB/T 47057-2026

Bamboo drinking straws

This document specifies the terminology and definitions, product types, requirements, inspection methods, inspection rules, packaging, labelling, transportation, and storage for bamboo drinking straws.

This document applies to the following two categories of bamboo drinking straw products manufactured from bamboo materials:

— Drilled bamboo drinking straws produced by processing bamboo strips into round bamboo rods and then drilling holes;

— Wound bamboo straws manufactured by rolling thin bamboo veneers into coils.

2026-08-01

-

Furniture

1 

GB/T 32444-2026

General technical requirements for bamboo furniture

This document specifies requirements, inspection rules, marking, instructions for use, packaging, transportation, and storage for bamboo furniture. It describes corresponding test methods, defines terms and definitions, and provides classification.

This document applies to quality control in the design, production, sales service, and inspection of bamboo furniture products.

Bamboo components in other furniture may be implemented by reference.

2026-08-01

GB/T 32444-2015

2 

QB/T 8195-2026

Office furniture – Privacy pods

This document specifies the requirements for the main dimensions and their tolerances, geometric tolerances, appearance, physical and chemical properties, mechanical properties, sound insulation performance, safety performance, and ventilation performance of office furniture – privacy pods. It describes the corresponding test methods and stipulates the inspection rules, warning labels, markings, instructions for use, packaging, transportation, and storage requirements, while also defining relevant terms.

This document applies to the design, production, inspection, and sale of privacy pods for office use; the design, production, inspection, and sale of privacy pods for other purposes shall be carried out by reference to this document.

2026-09-01

-

Hard goods

1 

QB/T 5296-2026

Wipe paper towel

This document specifies the requirements for the physical and chemical properties, microbiological criteria, dimensions, and sensory quality of wipe paper towel; describes the corresponding test methods; and sets forth provisions regarding inspection rules, labelling, packaging, transportation, and storage. It also provides a product classification system to facilitate technical regulation.

2026-09-01

QB/T 5296-2018

Hard goods: Electrical

1 

QB/T 8209-2026

Electronic Intelligent locks

This document specifies requirements for electronic intelligent locks regarding confidentiality, strength, durability, stability, functionality, security, and electronic information security; describes the corresponding test methods; and stipulates provisions for inspection, marking, packaging, transportation, and storage. It also provides product classification, grading, and marking for the purposes of technical regulations, and defines relevant terms and abbreviations.

This document applies to the production, inspection, and sale of electronic Intelligent locks. It may be used as a reference for the production, inspection, and sale of other lock products with similar applications.

2026-09-01

-

2 

QB/T 8212-2026

Sports health auxiliary appliances - hand-held cordless fascia impactor

This document defines the terminology for hand-held cordless fascia impactors, specifies the classification, requirements, inspection rules, marking and instructions, packaging, transportation, and storage of the product, and describes the corresponding test methods

This document applies to the production, inspection, and sale of hand-held cordless fascia impactors with an amplitude of 5 mm to 17 mm, intended to aid muscle recovery after exercise. This document does not apply to:

a) Fascia impactor for medical use;

b) Corded fascia impactor;

c) Fascia impactor intended for use by persons under 14 years of age;

2026-09-01

-

3 

QB/T 8202-2026

Household and similar floor washer

This document specifies requirements for the safety, noise, water residue, cleaning performance, charging and discharging performance, service life, debris removal capability, hair removal capability on hard surfaces, dust removal capability, filtration efficiency, water tank capacity, water recovery rate, operating time, drying performance, microbial removal capability, and leakage of hazardous substances of floor scrubbers for household and similar floor washers. It describes the corresponding test methods, specifies inspection rules, marking, packaging, transportation, and storage requirements, and provides product classification.

This document applies to the production, inspection, and sale of floor washers used in households and similar environments with a single-phase rated voltage not exceeding 250 V and other rated voltages not exceeding 480 V. This document does not apply to the following appliances:

— Steam mops;

— Electric mops;

— Carpet cleaners;

— Steam cleaners;

— Vacuum-type floor polishers;

— Industrial and commercial floor cleaning equipment;

— Cleaning robots for household and similar uses;

2026-09-01

-

Personal Care

1 

GB/T 19877-2026

Special cleaner for personal use

This document specifies the technical requirements, inspection rules, and requirements for labelling, packaging, transportation, and storage of special cleaners for personal use, and describes the corresponding test methods.

This document applies to special cleaners for personal use formulated primarily from surfactants, biocides, and conditioning agents, and possessing special functions such as cleaning, antibacterial, and bacteriostatic properties.

This document does not apply to non-water-washable products.

2026-09-01

GB 19877.1-2005

GB 19877.2-2005

GB 19877.3-2005

2 

GB/T 29680-2026

Facial washing milk (cream, mousse, gel, powder)

This document specifies the terminology and definitions, classification, requirements, test methods, inspection rules, and labelling, packaging, transportation, storage, and shelf life of facial washing milk (cream, mousse, gel, powder).

This document applies to facial washing milk, facial washing creams, facial washing mousse, facial washing gels, and facial washing powders intended primarily for cleansing the facial skin.

2026-09-01

GB/T 29680-2013

3 

QB/T 2660-2026

Skin tonic

This document specifies the sensory, physicochemical, microbiological, and maximum limits for harmful substances, as well as requirements for appearance, packaging, and net content of facial tonic. It describes the corresponding test methods, stipulates provisions regarding inspection procedures, labelling, packaging, transportation, storage, and shelf life, and provides a product classification for the purposes of these technical specifications.

This document applies to the production, inspection, and sale of aqueous-based skin care products (facial tonic) designed to replenish the skin’s moisture and protect the skin.

2026-09-01

QB/T 2660-2004

Textile

1 

QB/T 8194-2026

Leather and fur caps

This document specifies technical requirements for leather and fur caps, including specifications, raw materials, appearance and stitching quality, material composition, odour, and physical and chemical properties. It describes the corresponding test methods and sets forth provisions regarding inspection procedures, labelling, packaging, transportation, and storage.

This document applies to the production, inspection, and sale of hat products made primarily from leather, fur, or double face.

2026-09-01

-

Categories

Currently edition

New edition

Effective date

Toys

BS EN 71-3:2019 + A1:2021

BS EN 71-3:2019 + A2:2024

August 1^st, 2026

BS EN 71-4:2020

BS EN 71-4:2020 + A1:2025

BS EN 71-13:2021 + A1:2022

“BS EN 71-13:2021 + A2:2024

BS EN 71-3:2019 + A1:2021

BS EN 71-3:2019 + A2:2024

Children’s Product

BS EN 14988:2017 + A1:2020

BS EN 14988:2017 + A2:2024

ISO 9221-1:2015

ISO 9221:2024

ASTM F406-22

ASTM F406-24

AS 2088:2022

AS 2088:2022 (incorporating Amendment 1:2024)

Type of Risk

Number of alerts

Notes

Asphyxiation, Burns, Injuries

1

Baby sling

The product does not comply with the General Product Safety Regulation nor with EN 16512.

Burns, Strangulation

1

Fancy-dress costume

The product has long functional cords close to the neck. The cords may become trapped during various activities of a child. Moreover, the product is highly flammable. Children could wear the costume close to an ignition source and the costume could catch fire. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1 and EN 71-2.

Chemical

1

Toy phone

The battery compartment can easily be opened without use of any tools and the batteries inside are easily accessible. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1 and EN 62115.

1

Fancy-dress costume

The product contains chromium VI. The product does not comply with the REACH Regulation nor with the General Product Safety Regulation.

1

Craft kit

The glue has an excessive concentration of toluene. The product does not comply with the REACH Regulation.

2

Pencil case

The product does not comply with the REACH Regulation nor with the Persistent Organic Pollutants (POP) Regulation.

1

Toy slime

The product does not comply with the requirements of the Toy Safety Directive.

1

Bath toy

The product does not comply with the requirements of the Toy Safety Directive nor with EN 62115.

2

Soft toy

The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP). Moreover, the product has an excessive concentration of lead.  The product does not comply with the REACH Regulation.

1

Fancy-dress costume

The migration of chromium VI from the toy is too high. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-3.

1

Balloons

The rubber of the balloons releases an excessive amount of nitrosatable substances and nitrosamines. A child could be exposed to them if they touch the product or put it in their mouth. The product does not comply with the requirements of the Toy Safety Directive.

Chemical, Choking

1

Bath toy

The product does not comply with the requirements of the Toy Safety Directive nor with EN 62115 and EN 71-1.

Choking

1

Fidget toy

The toy has small parts (suction cups) that can easily detach. A small child may put them in their mouth. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1.

1

Soother

The product does not comply with the General Product Safety Regulation nor with EN 1400.

1

Baby soother feeder

The product does not comply with the General Product Safety Regulation.

1

Rocking toy

The toy has a protruding part (metal axis of the left handle). A small child may put it in their mouth. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1.

5

Soft toy

The product has a small part that can easily detach. A small child could put it in their mouth. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1.

1

Toy gun set

The product has small parts that can easily detach. Additionally, the fibrous stuffing material of the soft parts of the toy is easily accessible. A small child could put it in their mouth. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1.

1

Toy tea set

The toy has small parts that can easily detach. A small child may put them in their mouth. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1.

1

Picture book

The glitter varnish finish on the cover of the books is lifting and can be peeled off, generating small parts that can easily detach. A small child may put them in their mouth. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1.

1

Expandable toy

 The product expands more than 50% in size when in contact with water. If a child puts the product in their mouth or swallows it, contact with saliva or stomach liquids will cause the product to expand, which can result in occlusion of the respiratory tract or intestinal blockage. The product does not comply with the requirements of the Toy Safety Directive.

1

Wooden activity toy

The toy has small parts (the letter L, and the buttons) that can easily detach. Small children may put them in their mouths. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1.

1

Picture book

The glitter varnish finish on the cover of the books is lifting and can be peeled off, generating small parts that can easily detach. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1.

1

Toy rattle

The toy has small parts (metal bells) that can easily detach. Small children may put them in their mouths. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1.

2

Activity toy

The toy has small parts that can easily detach. A small child may put them in their mouth. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1.

1

Key ring with soft toy

 The toy has small parts that can easily detach. A small child may put them in their mouth. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1.

1

Fancy-dress costume

The product has small parts that can easily detach. A small child may put it in their mouth. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1.

Choking, Entrapment, Strangulation

1

Fancy-dress costume

The product has a small part that can easily detach. A small child may put it in their mouth. Moreover, the product has long cords in the neck area and in the chest and waist. These drawstrings can become trapped during various activities of a child. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1.

Choking, Injuries

1

Soft toy with key ring

The toy contains a small part (keyring) that can easily detach. A small child may put it in their mouth. Moreover, in case of removal of the keyring, a sharp metal point becomes accessible. This product does not comply with the requirements of the Toy Safety Directive.

Cuts, Entrapment, Injuries, Suffocation

1

Tricycle

The toy has sharp edges. Moreover, there are accessible gaps between moving parts of the tricycle. A child's leg may become trapped there. Finally, the plastic bag packaging is too thin. If a child places the plastic bag over their head, they could suffocate. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1.

Cuts, Injuries

1

Advent calendar

One of the toys included in the calendar has a retractable blade. The product does not comply with the requirements of the Toy Safety Directive

Cuts

1

Soft toy

The toy contains a metallic foreign body. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1, EN 71-2 and EN 71-3.

Entrapment, Strangulation

3

Swing

The swing has openings that can cause the child to fall and the head can be trapped in them. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-8.

Environment

5

Key ring toy

The solders in the product have an excessive concentration of lead. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).

Health risk / other

6

Sand art activity toy

The play sand contains asbestos fibres. The product does not comply with the requirements of the Toy Safety Directive.

1

Yoyo puffer toy

The toy could rupture and the filling on the inside could come out. The sand inside contains asbestos. The product does not comply with the requirements of the Toy Safety Directive.

Injuries

1

Baby carrier

The circumference of the carrying bag loop is too long. Moreover, the product does not provide the necessary durability, which may lead to the baby falling.  The product does not comply with the General Product Safety Regulation nor with EN 16512.

1

Climbing arch 

The product lacks self-locking mechanisms on the different board, which can cause them to come loose during use. Moreover, the product lacks stability and can tip over during use, leading to a child falling off and suffering a concussion. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-8.

1

Baby stroller

The product does not comply with the General Product Safety Regulation.

Injuries, Strangulation

1

Baby carrier

The leg openings of the product are too large and the fastening capacity is insufficient which may cause the baby to slip out. This product does not comply with the General Product Safety Regulation nor with EN 13209-2.

Suffocation

1

Craft kit

The plastic bag packaging is too thin. The product does not comply with the requirements of the Toy Safety Directive nor with EN 71-1.

2

Baby sleeping bag

The sleeping bag has a hood, which may cover the mouth and/or nose area of the baby. Moreover, the neck opening is not secured with appropriate fasteners. The product does not comply with the General Product Safety Regulation.

Type of Risk

Number of alerts

Notes

Chemicals

2

Bracelet
The product has an excessive concentration of cadmium and lead. The product does not comply with the General Product Safety Regulation nor the REACH Regulation.

1

Necklace

The product has an excessive concentration of cadmium. The product does not comply with the REACH Regulation.

1

Earrings

The product has an excessive concentration of cadmium and release of nickel. The product does not comply with the REACH Regulation.

Type of Risk

Number of alerts

Notes

Burns, fire

1

Pet collar 

The battery management system lacks a cell temperature monitoring device. The product does not comply with the requirements of the General Product Safety Directive nor with EN 62133-2.

Burns, Injuries

1

Cookware set

The handle has a design defect which can cause it to detach during use. The product does not comply with the General Product Safety Regulation.

Chemical

1

Wrist support

The PVC material of the product has an excessive amount of bis(2-ethylhexyl) phthalate (DEHP). The product does not comply with the REACH Regulation.

Environment

1

Solar panel fountain

The solders in the product have an excessive concentration of lead.  The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).

Fire

1

Candles

The wicks of the candle can present excessive smoke, wax dripping, and flaming. Objects near the ignited candles can catch fire. The product does not comply with the General Product Safety Regulation.

Product

Notes

Aluminium Drinking bottles

Too high migration of aluminium 

RASFF Window - Notification detail (europa.eu)

Bamboo bowl

Migration of melamine

RASFF Window - Notification detail (europa.eu)

Drinking bottle

Migration of aluminium 

RASFF Window - Notification detail (europa.eu)

Aluminium Drinking bottles

Increasing migration of aluminium

RASFF Window - Notification detail (europa.eu)

Cardboard plates

Migration of lead and phthalates (DBP+DIBP) from cardboard plates

RASFF Window - Notification detail (europa.eu)

Aluminium water bottle

Aluminium levels exceeding the prolonged migration limit, associated with an internal coating made of phenoxy resin based on bisphenol A.

RASFF Window - Notification detail (europa.eu)

Type of Risk

Number of alerts

Notes

Chocking

3

Soft Toys

 The toy has parts that can easily detach or break off during reasonably foreseeable use, creating small parts. The product does not meet the requirements of the Toys (Safety) Regulations 2011.

Health

13

Action Figures (Non Powered)

The product presents a risk to health as the sand may be contaminated with a small quantity of asbestos.
The product does not meet the requirements of the Toys (Safety) Regulations 2011.

2

Scientific Toys (Non Powered)

The product presents a risk to health as the sand-like material inside the toy may be contaminated with a small quantity of asbestos. The product does not meet the requirements of the Toys (Safety) Regulations 2011.

1

Dolls/Soft Toys (Non Powered)

The product presents a risk to health as the sand may be contaminated with a small quantity of asbestos. The product does not meet the requirements of the Toys (Safety) Regulations 2011.

1

Board Games (Non Powered)

The product presents a risk to health as the sand may be contaminated with a small quantity of asbestos.
The product does not meet the requirements of the Toys (Safety) Regulations 2011.

injuries

1

Baby High Chair

The product is missing the required safety information and instructions, which may lead to the baby being incorrectly placed in the chair. If a parent were to leave the baby unattended, there is a risk of the baby falling due to the unstable nature of the chair. The product does not meet the requirements of the General Product Safety Regulations 2005.

Injuries and asphyxiation

1

Water Beads

If the product is swallowed in its hydrated form, it can block a young child’s airway. The product does not meet the requirements of the General Product Safety Regulations 2005.

1

Baby/Infant Stimulation Toys (Non Powered)

If the product is swallowed in its hydrated form, it can block a young child’s airway. The product does not meet the requirements of the Toys (Safety) Regulations 2011.

Suffocation

1

Baby Carry Cots/Baskets/Cradles

The baby bed has no valid technical documentation and there is a lack of labelling, marking and instructions. In the absence of markings and instructions to support consumers in safe usage, it may be possible for the product to be used in an unsafe manner. The product does not meet the requirements of the General Product Safety Regulations 2005.

Type of Risk

Number of alerts

Notes

Asphyxiation

1

Flower/plant pot replacement parts/accessories

If the product is swallowed in its hydrated form, it can block a young child’s airway. The product does not meet the requirements of the General Product Safety Regulations 2005.

Entrapment

1

Snow/Ice Sports Equipment

The product may not fully deploy when used, which may make it difficult to use when searching for victims in an avalanche. This could delay the rescue of individuals trapped in the snow. The product does not meet the requirements of the General Product Safety Regulations 2005.

Fire

1

Blankets/Throws (Powered)

The plug does not meet the dimensional requirements of BS 1362. The fuse is underweight and the length is below the minimum permitted tolerance. A compliant fuse is required to ensure the safe operation of the plug under fault conditions, and its absence could lead to the plug overheating and/or exploding. Improvements are also required to product documentation and marking. The product does not meet the requirements of the Electrical Equipment (Safety) Regulations 2016 or the Plugs & Sockets etc (Safety) Regulations 1994.

Health

17

Arts/Crafts/Needlework Sand Supplies

The sand may be contaminated with a small quantity of asbestos. The product does not meet the requirements of the Toys (Safety) Regulations 2011.

Injuries and asphyxiation

1

Ornament Accessories

If the product is swallowed in its hydrated form, it can block a young child’s airway. The product does not meet the requirements of the General Product Safety Regulations 2005.

2

Flower/Plant Pots Replacement Parts/Accessories

If the product is swallowed in its hydrated form, it can block a young child’s airway. The product does not meet the requirements of the Toys (Safety) Regulations 2011.

Injuries

1

Snow/Ice Sports Equipment - Replacement Parts/Accessories

The replaceable toe and heel may crack during normal use. This could affect the stability of the boot and increase the risk of consumers receiving injuries. The product does not meet the requirements of the General Product Safety Regulations 2005.

1

Cycle Parts - Pedal

The pedal axles can crack during use. This may cause the pedal to detach unexpectedly from the crank arm. The product does not meet the requirements of the General Product Safety Regulations 2005.

1

Hoists/Winches/Lifts/Jacks (Non-Powered)

Without clear guidance on correct operation and safe handling, users may use the lifter incorrectly, increasing the likelihood of an incident. The product does not meet the requirements of the Supply of Machinery (Safety) Regulations 2008.

1

Knives/Pocket Knives (Hobby/Utility) (Non Powered)

The folding mechanism may fail to keep the blade securely locked in the closed position, which could cause the blade to open unexpectedly. The product does not meet the requirements of the General Product Safety Regulations 2005.

Hazard

Number of alerts

Notes

Fall

1

Playground swing sets

The rivets used to support the swing seat can fail, posing a fall hazard to children.

1

Infant walkers

The recalled infant walkers violate the mandatory standard for infant walkers because they can fit through a standard doorway and fail to stop at the edge of a step, posing a risk of serious injury or death due to a fall hazard.

1

Bassinets

The recalled convertible bassinets violate the mandatory standard for bedside sleepers because the mechanism used to attach the product to the adult bed creates an opening between the bedside sleeper and mattress, posing a deadly fall hazard to infants.

Ingestion

2

Magnet games

The recalled magnet games violate the mandatory standard for toys because they contain loose high-powered magnets that fit within CPSC’s small parts cylinder, posing an ingestion hazard to children. When high-powered magnets are swallowed, the ingested magnets can attract each other, or other metal objects, and become lodged in the digestive system. This can result in perforations, twisting, and/or blockage of the intestines, blood poisoning and death.

Fire and burn

1

Ride-on trucks

The truck’s circuit board can overheat and ignite, posing fire and burn hazards.

Tip-over and entrapment

1

Tip-restraint kits

The recalled plastic tip restraint kits (also referred to as furniture straps) can break or degrade, posing tip-over and entrapment hazards that can result in serious injuries or death to children or elderly consumers interacting with furniture that is secured to the wall with the defective plastic tip restraints. This is a hidden defect because consumers who purchase and install this product may be under a false sense of security that their furniture is safe from a tip-over incident.

Choking

1

Spiral tower toys

The recalled spiral tower toy sets violate the mandatory standard for toys because they contain small balls and are intended for children under three years of age, posing a deadly choking hazard.

Type of Risk

Number of alerts

Notes

Tip-over and entrapment

2

Dressers

The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standard as required by the STURDY Act.

Head injury

2

Bicycle helmets

The recalled helmets violate the mandatory safety standard for bicycle helmets because the helmets do not comply with the impact attenuation, positional stability, labeling and certification requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury.

Laceration

1

Camping knives

The folding mechanism on the blade can fail to remain properly secured in the closed position, posing a laceration hazard.

Entrapment and asphyxiation

4

Adult portable bed rails

The recalled bed rails violate the mandatory standard for adult portable bed rails because users can become entrapped within the bed rail, or between the bed rail and the side of the mattress, posing a serious entrapment hazard and risk of death by asphyxiation. In addition, the bed rails do not bear the required hazard warning labels.

Fall

1

Bicycles

The bike’s fork steerer tube can develop a small fatigue crack that can lead to a progressive failure of the fork, posing a fall hazard.

1

Chairs

The recalled chairs’ base can bend, posing a fall hazard.

1

Ice climbing axes

The ice axe shaft can break at the handle during use, posing a fall hazard, which can result in serious injury or death.

Ingestion

1

Grill brushes

Small metal wire bristles can detach from the brushes and stick to the grill or food, posing an ingestion hazard and risk of serious internal injuries that could require surgery.

Choking and ingestion

1

LED tumblers

The recalled LED tumblers can break, making the button cell batteries accessible to children and posing choking and ingestion hazards. When button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns and death.

Impact and burn

1

Pans

The metal cap on the screw that connects the sauté pan to the handle can become detached and forcefully eject when heated, posing impact and burn hazards to consumers.

Impact

1

Bed frames

The canopy beams of the bed frames can collapse primarily when the bed is moved, posing impact and injury hazards to consumers.