A Quick Overview of the New EU Toy Safety Regulation (EU) 2025/2509

First published::
March 2025

Last updated:
January 2026

The European Union (EU) has adopted the Toy Safety Regulation (EU) 2025/2509 to enhance the protection of children from hazardous toys. This regulation replaces the existing Directive 2009/48/EC (also known as the Toy Safety Directive).

This article provides a quick overview of the new Toy Safety Regulation (EU) 2025/2509.

Overview of the New Toy Safety Regulation (EU) 2025/2509

On 12 December 2025, the new Regulation (EU) 2025/2509 was published in the Official Journal of the European Union, repealing the previous Directive 2009/48/EC, and applicable from 1 August 2030. This regulation is aimed at ensuring a higher level of safety for toys and protecting children from potential hazards, introducing stricter requirements for manufacturers, importers, and distributors.

Main Changes of the New Toy Safety Regulation Compared with the Toy Safety Directive

• Change from Directive to Regulation:
  The new Toy Safety Regulation represents a significant shift from a directive to a regulation, ensuring that the rules are directly applicable and enforceable across all EU member states without requiring national legislation.
  
  
  
• New scope and exemption:
  The new scope now includes catapults and slings (which were excluded under the Toy Safety Directive), while paintball equipment, ordinary reading books, and ordinary educational books are clearly exempted.
  
  
  
• New requirements for Economic Operators obligations:
  The new regulation introduces enhanced obligations and accountability measures, clarifying responsibilities for manufacturers, importers, and distributors to ensure compliance with stringent safety requirements. Economic operators must also comply with the General Product Safety Regulation (GPSR), which came into effect in December 2024, particularly for online sales, accident reporting, recall notices, and consumer rights to information and remedy.
  
  Additionally, obligations for providers of online market places and fulfilment service providers are included.
  
  For more information about GPSR, please read our article EU Regulation on General Product Safety – Meeting the New Requirements.
  
  
  
• Expanded ban on additional harmful chemicals:
  The new Regulation significantly broadens the generic ban on hazardous chemicals to prohibit CMR substances (Carcinogenic, Mugagenic or Reprotoxic), endocrine disruptors, specific target organ toxicity substances, respiratory sensitisers and skin sensitisers. It also includes specific bans on PFAS and Bisphenols, as well as other restrictions on the use of biocides and preservatives in toys, and nitrosamines and nitrosatable substances.
  
  For allergenic fragrances, the new regulation tightens restrictions. Under the Toy Safety Directive, 58 allergenic fragrances were prohibited unless technically unavoidable and below 100 mg/kg. Under the new Toy Safety Regulation, 59 allergenic fragrances are prohibited unless technically unavoidable and below 10 mg/kg.
  
  For fragrances subject to specific labelling requirements, the list is updated to 65 substances and should be labelled if the concentration exceeds 10 mg/kg. This information would also need to be included in the Digital Product Passport.
  
  
  
• Expanded scope and list of chemicals from Appendix C of the old TSD:
  The new Regulation expands the list of chemicals that were included in Appendix C of the Toy Safety Directive, which are now applicable to all toys, whereas the Toy Safety Directive applies them only to toys intended for children under 36 months or those intended to be placed in the mouth. The new text modifies some of the previous limit values and adds new substances to this list: Styrene, acrylonitrile, butadiene, and vinyl chloride.
  
  
  
• New labelling requirements:
  The new Regulation introduces minimum size, visibility, and legibility requirements for warnings. All warnings must be preceded by the word "Warning" or feature a generic pictogram* (at least 10 mm in size, with a black triangle, yellow background, and black exclamation mark). Labels must also provide access to the Digital Product Passport (DPP) via a data carriers (assume QR code) and include manufacturers' publicly available communication channels for consumers to report safety concerns or accidents.
  
  *Example of a generic pictogram:
  
  

• Introduction of the Digital Product Passport (DPP):
  The DPP will replace the EU declaration of conformity (DoC) and will be mandatory for all toys sold in the EU under the new Toy Safety Regulation. Each toy model must have a DPP confirming compliance with the regulation, accessible via a data carrier (e.g., QR code) in the relevant EU language(s), and available for 10 years. The data carrier must be physically present on the toy, its label, packaging, or accompanying documentation to ensure visibility before purchase.
  
  Even if the new Toy Safety Regulation does not include sustainability-related information inside the toys DPP, but only requirements related to the safety of the toy, it is expected that the Ecodesign for Sustainable Products Regulation (ESPR) might include toys within its scope in the medium term. This would mean that, it should be possible in the future to include more precise information in the toys DPP related to environmental sustainability.
  
  
  
• New safety assessment requirements:
  Manufacturers must evaluate chemical exposure risks, including combined exposure to different chemicals in toys, in line with obligations under the REACH Regulation (EC) No 1907/2006. The possible non-intended presence of substances subject to generic prohibitions or other restrictions shall also be considered.
  
  Additionally, assessments must address health risks posed by digitally connected toys, incorporating mental health considerations. Toys using artificial intelligence (AI) must comply with the Artificial Intelligence Act, including adherence to cybersecurity, personal data protection, and privacy requirements.
  
  
  
• Updates to EN 71 series
  On top of the Toy Safety Regulation requirements, several revisions to the EN 71 series (the key safety standards for toys in EU) have been recently released.

  Main changes are listed below:

  • EN 71-1: Expanded materials and soaking tests to align with international standards; new security tests for the toys intended to bear a child and added clause for food imitation toys
    
    
  • EN 71-2/A1: Introduced new definitions linked to EN 71-13; clarified requirements for highly flammable/flammable liquids in chemical toys; updated test methods for washing of disguise costumes; added a new appendix on risk assessment for disguise costumes and head-worn toys
    
    
  • EN 71-3/A2: Removed the dewaxing procedure; categorised slime according to TS 17973 (tested as CAT I or CAT II); allowed CrIII and CrVI conformity determination via total Cr measurement (same for organotin substances)
    
    
  • EN 71-4: Revised test methods for container closures
    
    
  • EN 71-5: Added “slime kits” with requirements for chemicals, marking, and safety rules
    
    
  • EN 71-7: Introduced new requirements for booster substances (preservatives); revised annexes for commonly used substances like colourants and preservatives
    
    
  • EN 71-8: Included inflatable toys in the scope
    
    
  • EN 71-13/A2: Added new requirements for closing systems of recipients; reviewed marking/labelling requirements for olfactory board games, cosmetic kits, and gustative games
    
    
  • EN 71-14: Slight revisions on marking, warnings, and falling and crushing hazards
    
    
  • EN 71-15 to EN 71-19: Introduced new standards to support the requirements of Appendix C of the Toy Safety Directive, addressing Formamide, flame retardants (TCEP, TCPP, TDCP), Isothiazolinones (MIT, BIT, CIT), Phenol, and BPA
    
    
  • EN 71-20: Microbiological safety of toys containing accessible aqueous media - This document specifies microbiological cleanliness and preservative efficacy requirements for accessible aqueous media in toys, in replacement of the protocol CE n°2 (NB toys protocol).

How Can Toy Brands, Manufacturers, and Importers Prepare for the New Toy Safety Regulation?

• Clarity of the new Toy Safety Regulation scope:
  • Identify which products fall under toy/non-toy classifications
  • Evaluate whether any items need to be discontinued before the regulation takes effect
    
    
    
• Enhanced chemical requirements:
  • Prepare for expanded list of chemical restrictions: the list of chemical restrictions in the new regulation has been expanded in comparison with that of Appendix C of the Toy Safety Directive, and are now applicable to ALL toys (In the Toy Safety Directive, it is limited to toys for children under 3 years old and toys intended to be placed in the mouth)
  • Address expanded generic ban on harmful substances, now including more categories of substances beyond CMR, such as endocrine disruptors or skin sensitisers. Consider new restrictions on PFAS and Bisphenols, among others. Assess whether current testing portfolios cover new chemical requirements to avoid compliance surprises
  • Anticipate potential increases in compliance costs or look for smart chemical testing such as Eurofins Chem-ST™ chemical smart testing for Toys
    
    
    
• Marking and labelling changes:
  • Redesign toy packaging to meet new requirements, including:
    • Optional to include the new graphic warning symbol
    • Digital product passport carrier, such as a QR code
  • Publicly available communication channels (such as telephone number, electronic address, dedicated section in website)
    
    
    
• Digital Product Passport:
  • Engage multiple departments, including Management, QA, Creative, and IT, for implementation
  • Update all product artwork to reflect new DPP requirements under the new Toy Safety Regulation
  • Decide whether to develop and host DPP internally or partner with an external provider
  • Ensure supply chain visibility, extending beyond Tier 1 to Tier 3/4/5 if necessary
  • Consider potential overlaps with other DPP categories, such as batteries
  • Consider future needs to include environmental and sustainability information in the toys DPP under ESPR framework
    
    
    
• New focus on sustainability:
  • Align with the EU’s Ecodesign for Sustainable Products Regulation and DPP sustainability expectations. Download our eBook
  • Verify that all sustainability claims are accurate and measurable, in line with the proposed Green Claims Directive and Directive (EU) 2024/825 as regards empowering consumers for the green transition through better protection against unfair practices and through better information
  • Maintain complete BOMs and BOS and deep supply chain visibility to ensure compliance
  • Monitor the supply chain to prevent any claims from being invalidated

The new EU Toy Safety Regulation introduces critical updates to ensure toy safety, enhance consumer protection, and align with digital and sustainability trends. Companies must take proactive steps to ensure full compliance before the regulation takes effect.

Contact us now or explore how Eurofins Toy Testing Services can help!