JavaScript is disabled. Please enable to continue!
Mobile search icon
Media Centre >> News >> Electrical & Electronic products | Monthly bulletin | September 2019

Electrical & Electronic products | Monthly bulletin | September 2019

Sidebar Image

Wednesday, September 18, 2019

Eurofins newsflash Electrical and Electronic products

Regulatory news - Eurofins updates

 

Regulatory news


 

Europe

 

New Draft Amendments for RoHS

 

On 8th August 2019, the European Commission has published the following amendments to Directive 2011/65/EU (RoHS) as below, regarding exemptions for bis (2-ethylhexyl) phthalate (DEHP) and lead:

 

Reference

Title

C/2019/5780 final

COMMISSION DELEGATED DIRECTIVE (EU) .../… amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for bis(2-ethylhexyl) phthalate (DEHP) in certain rubber components used in engine systems

C/2019/5781 final

COMMISSION DELEGATED DIRECTIVE (EU) .../… amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders used in certain combustion engines

 

On the other hand, recently, the European Commission published the following notifications to World Trade Organization about RoHS Directive 2011/65/EU (non-exhaustive):

 

Notification number / Link

Country

Title

G/TBT/N/EU/674

Europe

Draft Commission Delegated Directive amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for hexavalent chromium as an anticorrosion agent of the carbon steel cooling system in absorption refrigerators

G/TBT/N/EU/675

Europe

Draft Commission Delegated Directive amending, for the purposes of adapting to scientific and technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for the use of cadmium in certain radiation tolerant video camera tubes

G/TBT/N/EU/676

Europe

Draft Commission Delegated Directive amending, for the purposes of adapting to scientific and technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in platinized platinum electrodes used for certain conductivity measurements

G/TBT/N/EU/677

Europe

Draft Commission Delegated Directive amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders and termination finishes used in certain hand-held combustion engines

 

Harmonised standards for EMC

 

Below you will some documents recently published in the Official Journal of the European Union.

 

Date

Reference

Title

06-08-2019

C/2019/5759

Commission Implementing Decision (EU) 2019/1326 of 5 August 2019 on the harmonised standards for electromagnetic compatibility drafted in support of Directive 2014/30/EU of the European Parliament and of the Council

 

UK

 

Regulatory updates

 

Below a summary table with recent regulation proposals notified to European Commission by UK authorities (Non-exhaustive):

 

Notification number

Countries

Title

2019/344/UK

UK

IR 2102 – UK Interface Requirement 2102 Licence exempt static indoor and low gain mobile phone repeaters

2019/379/UK

UK

IR 2103 – UK Interface Requirement 2103 Shared Access Low Power

2019/380/UK

UK

IR 2104 – UK Interface Requirement 2104 Shared Access Medium Power

2019/381/UK

UK

IR 2104 – UK Interface Requirement 2105 Shared Access Indoor 26 GHz

 

US

 

New name for the Bureau of electronic and appliance repair, home furnishings, and thermal insulation

 

In July 2018, the licensing of household movers became part of  the California Department of Consumer Affairs as it moved under the jurisdiction of the Bureau of electronic and appliance repair, home furnishings, and thermal insulation (BEARHFTI). For this reason, in January 2019, BEARHTFI changed its name to the Bureau of household goods and services (BHGS) to better reflect its overall purpose and mission.

 

BHGS is in charge of registration and regulation of electronics and appliance repair businesses and has jurisdiction over the sale and administration of service contracts on various consumer products. BHGS licenses and regulates the manufacture and sale (retail, wholesale and import) of upholstered furniture and bedding, supply dealers, custom upholsterers, bedding sanitizers, and the manufacture of thermal insulation products, tests for flammability and sanitation and household movers.

 

In May 2019, BHGS revised and published the Home Furnishing and Thermal Insulation Act and Rules and Regulations.

 

International

 

Regulatory proposals notified to WTO

 

Below a summary table with some recent notifications to World Trade Organization (non-exhaustive):

 

Notification number / Link

Country

Title

G/TBT/N/KOR/846

Korea

Draft partial amendment of the Technical Requirements for the Telecommunication Terminal Equipment

G/TBT/N/KOR/848

Korea

A draft revision of safety criteria for primary batteries

G/TBT/N/CAN/596

Canada

Consultation of SPR-003, Issue 1

 

Supplementary Procedure for Assessing Radio Frequency Exposure Compliance of Portable Devices Operating in the 60 GHz Frequency Band (57 GHz – 71 GHz), sets out the general test methods to be followed when carrying out an RF exposure compliance assessment of portable devices operating in the 60 GHz frequency band (57 GHz – 71 GHz)

G/TBT/N/CHL/484

Chile

Safety analysis and/or test protocol for electrical products: Socket-outlet mounted nightlights

G/TBT/N/CHL/485

Chile

Safety analysis and/or test protocol (PE No. 1/35:2019) for surface-cleaning appliances for household use employing steam

G/TBT/N/CHL/486

Chile

Safety analysis and/or test protocol (PE No. 5/27:2019) for child-appealing portable luminaires

G/TBT/N/CHL/487

Chile

Safety analysis and/or test protocol (PE No. 8/9:2019) for electronic audio/video, information technology and communication technology equipment. External power supplies for computers and tablet chargers (switch mode units)

G/TBT/N/CHL/488

Chile

Draft safety analysis and/or test protocol for electrical products: Vertical steam irons (PE No.1/36: 2019)

G/TBT/N/CHL/493

Chile

Technical specifications for the design of energy efficiency labels for electric ovens

G/TBT/N/JPN/627

Japan

Partial revision of Regulations for Enforcement of the Radio Act etc

G/TBT/N/THA/552

Thailand

Draft Thai Industrial Standard for Self-Ballasted Lamps for General Lighting Services by Rated Voltage >50 V: Safety Requirements (TIS 2780-25XX (20XX))

G/TBT/N/THA/553

Thailand

Draft Thai Industrial Standard for Lampholders for Tubular Fluorescent Lamps and Starterholders (TIS 344-25XX (20XX))

G/TBT/N/USA/1505

US

Energy Conservation Program: Energy Conservation Standards for Dishwashers, Grant of Petition for Rulemaking

G/TBT/N/USA/1507

US

Revision to Automatic Dependent Surveillance-Broadcast (ADS-B) Out Equipment and Use Requirements

G/TBT/N/USA/1508

US

Energy Conservation Program: Test Procedure for Clothes Dryers

G/TBT/N/VNM/148

Vietnam

Draft QCVN …:2019/BKHCN National technical regulation on safety of secondary lithium batteries

 

Regulatory updates

 

Below a summary table with some recent updates in legislations and proposals (non-exhaustive):

 

Date

Country

Update

03-06-2019

Brazil

Act 3484 by the Brazilian Regulator, Agência Nacional De Telecomunicações (ANATEL)

 

New sample requirements and testing procedures for assessing the conformity of lithium batteries used in cell phones

05-06-2019

Canada

Government of Canada published a Notice No. SLPB-001-19 - Decision on Revisions to the 3500 MHz Band to Accommodate Flexible Use and Preliminary Decisions on Changes to the 3800 MHz Band

10-06-2019

Mexico

The Secretariat of Economy of Mexico notified Mexican customs authorities that NOM-208 certificates issued on behalf of someone other than the importer will be accepted

 

This update affects all devices submitted for radio and safety Type Approval in Mexico for NOM standards, and is effective as of June 3, 2019. Click here for more information

12-06-2019

Peru

Peru Regulator, Ministerio de Transportes y Comunicaciones (MTC) published Supreme Decree SN˚ 019-2019-MTC on Approval of Telecommunications Equipment and Apparatus

28-06-2019

Taiwan

Amendments to the "Electrical and Electronic Product Marking Standards" was published with code No. 10802413360

09-07-2019

Vietnam

Publication of Circular 05/2019/TT-BTTTT – New list of devices subjected to Type Approval and Declaration of Conformity (2019)

12-07-2019

Liechtenstein

Liechtenstein State published regulation Nº 181 concerning the repeal of the Regulation on Low Voltage Electrical Products

19-07-2019

Indonesia

Indonesia Telecommunication Authority (SDPPI) has published the Regulation No. 159/2019 on recognizing Foreign test report for Telecommunication devices other than mobile phone, handheld computer and tablet computer

August 2019

Canada

Publication of SRSP-101, Issue 2 Standards Released

 

Technical Requirements for Fixed Earth Stations Operating Above 1 GHz in Space Radiocommunication Services and Earth Stations On Board Vessels (ESVs) Operating in the Fixed-Satellite Service

07-08-2019

Australia

Australian Government published the update of Greenhouse and Energy Minimum Standards (Household RefrigeratinG Appliances) Determination 2019

08-08-2019

US

Publication of proposal to maintain current radiofrequency exposure safety standards by FCC (Federal Communications Commission). The official publication here

 

Europe/International

 

Standards updates

 

Below a summary table with some recent standards updates and upcoming dates of withdrawal (non-exhaustive):

 

(*) Date of availability: date when the definitive text in the official language versions of an approved CEN/CENELEC publication is distributed by the Central Secretariat.

 

(**) Date of withdrawal: latest date by which national standards conflicting with an EN (and HD for CENELEC) have to be withdrawn.

 

IEC Standards

Reference

Title

Publication date

CISPR 16-2-3:2016+AMD1:2019 CSV

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

2019-06-25

IEC 60068-2:2019 SER

Environmental testing - Part 2: Tests - ALL PARTS

2019-07-02

IEC 60068-2-64/AMD1:2019 PRV 

Amendment 1 - Environmental testing – Part 2-64: Tests – Test Fh: Vibration, broadband random and guidance

2019-07-19

IEC 60947:2019 SER 

Low-voltage switchgear and controlgear - ALL PARTS

2019-07-08

IEC 61010-2-032:2019

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

2019-06-21

IEC 61010-2-033:2019 

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters for domestic and professional use, capable of measuring mains voltage

2019-06-21

IEC 61169-24:2019 

Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F)

2019-07-19

IEC 61557-1:2019

Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements

2019-07-26

IEC 61810-10:2019

Electromechanical elementary relays - Part 10: Additional functional aspects and safety requirements for high-capacity relays

2019-07-11

IEC 62026-2:2008+AMD1:2019 CSV

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)

2019-07-10

IEC 62341-5-3:2019 PRV 

Organic light emitting diode (OLED) displays - Part 5-3: Measuring methods of image sticking and lifetime

2019-08-02

IEC 62597:2019 

Magnetic field levels generated by electronic and electrical apparatus in the railway environment with respect to human exposure - Measurement procedures

2019-07-17

IEC 63009:2019

Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 20 kHz to 500 kHz

2019-07-11

IEC 80601-2-77:2019 

Medical electrical equipment - Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment

2019-07-09

IEC 80601-2-78:2019

Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation

2019-07-09

Reference

Title

Forecast  Publication date

CISPR 32/AMD1:2019, Ed. 2.0

Electromagnetic compatibility of multimedia equipment – Emission requirements

2019-09-20

IEC 60118-13:2019

Electroacoustics - Hearing aids - Part 13: Electromagnetic compatibility (EMC)

2019-09-27

Note: See additional information (work in progress) of the main standard

ETSI Standards

Reference

Title

ETSI EN 303 345-1 V1.1.1 (2019-06)

Broadcast Sound Receivers; Part 1: Generic requirements and measuring methods

ETSI EN 300 328 V2.2.2 (2019-07)

Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum

ETSI EN 300 674-2-2 V2.2.1 (2019-06)

Transport and Traffic Telematics (TTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5 795 MHz to 5 815 MHz frequency band; Part 2: Harmonised Standard for access to radio spectrum; Sub-part 2: On-Board Units (OBU)

ETSI EN 301 489-12 V3.1.1 (2019-04)

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 12: Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS) Harmonised Standard for electromagnetic compatibility

ETSI EN 301 489-19 V2.1.1 (2019-04)

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing positioning, navigation, and timing data; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU

ETSI EN 301 489-2 V2.1.1 (2019-04)

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 2: Specific conditions for radio paging equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU

ETSI EN 301 489-20 V2.1.1 (2019-04)

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS); Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU

ETSI EN 301 489-3 V2.1.1 (2019-03)

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU

ETSI EN 301 489-33 V2.2.1 (2019-04)

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 33: Specific conditions for Ultra-WideBand (UWB) devices; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU

ETSI EN 301 489-34 V2.1.1 (2019-04)

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones; Harmonised Standard covering the essential requirements of article 6 of Directive 2014/30/EU

ETSI EN 301 489-4 V3.2.1 (2019-04)

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 4: Specific conditions for fixed radio links and ancillary equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU

ETSI EN 301 489-5 V2.2.1 (2019-04)

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) and Terrestrial Trunked Radio (TETRA); Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU

ETSI EN 301 489-6 V2.2.1 (2019-04)

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU

ETSI EN 301 489-9 V2.1.1 (2019-04)

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU

ETSI EN 303 213-6-1 V3.1.1 (2019-07)

Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 6: Harmonised Standard for access to radio spectrum for deployed surface movement radar sensors; Sub-part 1: X-band sensors using pulsed signals and transmitting power up to 100 kW

ETSI EN 303 364-3 V1.1.1 (2019-07)

Primary Surveillance Radar (PSR); Harmonised Standard for access to radio spectrum; Part 3: Air Traffic Control (ATC) PSR sensors operating in the frequency band 8 500 MHz to 10 000 MHz (X band)

ETSI EN 303 520 V1.2.1 (2019-06)

Short Range Devices (SRD); Ultra Low Power (ULP) wireless medical capsule endoscopy devices operating in the band 430 MHz to 440 MHz; Harmonised Standard for access to radio spectrum

ETSI GR mWT 018 V1.1.1 (2019-08)

Analysis of Spectrum, License Schemes an Network Scenarios in the W-band

ETSI TR 103 088 V2.1.1 (2019-07)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Using the EN 301 489 series of EMC standards

ETSI TR 103 580 V1.1.1 (2019-08)

Urban Rail ITS and Road ITS applications in the 5,9 GHz band; Investigations for the shared use of spectrum

ETSI TS 103 463-2 V1.1.1 (2019-06)

Access, Terminals, Transmission and Multiplexing (ATTM); Sustainable Digital Multiservice Communities; Key Performance Indicators for Sustainable Digital Multiservice Areas; Part 2: Global KPIs for Sustainable Digital MultiService Areas

ETSI TS 103 571-3 V1.1.1 (2019-06)

Core Network and Interoperability Testing (INT); Diameter Conformance testing for Sh/Dh interfaces; (3GPP™ Release 13); Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) pro forma specification

ETSI TS 110 174-2-2 V1.1.1 (2019-06)

Access, Terminals, Transmission and Multiplexing (ATTM); Sustainable Digital Multiservice Cities; Broadband Deployment and Energy Management; Part 2: Multiservice Networking Infrastructure and Associated

ETSI TS 137 114 V15.5.0 (2019-07)

Universal Mobile Telecommunications System (UMTS) LTE; Active Antenna System (AAS) Base Station (BS) Electromagnetic Compatibility (EMC) (3GPP TS 37.114 version 15.5.0 Release 15)

ETSI TS 138 141-1 V15.2.0 (2019-07)

5G; NR; Base Station (BS) conformance testing Part 1: Conducted conformance testing (3GPP TS 38.141-1 version 15.2.0 Release 15)

ETSI TS 138 141-2 V15.2.0 (2019-07)

5G; NR; Base Station (BS) conformance testing Part 2: Radiated conformance testing (3GPP TS 38.141-2 version 15.2.0 Release 15)

ETSI TS 151 010-1 V13.8.0 (2019-07)

Digital cellular telecommunications system (Phase 2+) (GSM); Mobile Station (MS) conformance specification; Part 1: Conformance specification (3GPP TS 51.010-1 version 13.8.0 Release 13)

CENELEC / CEN

Reference

Title

Date of Availability (*)

Supersedes

CLC IEC/TR 62271-307:2019

High-voltage switchgear and controlgear - Part 307: Guidance for the extension of validity of type tests of AC metal and solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV

05-07-2019

 

CWA 17431:2019

Principles and guidance for licensing Standard Essential Patents in 5G and the Internet of Things (IoT), including the Industrial Internet

12-06-2019

 

EN 60320-1:2015/AC:2019-06

Appliance couplers for household and similar general purposes - Part 1: General requirements

2019-06-21

 

CENELEC / CEN

Reference

Title

Date of Withdrawal (**)

Supersedes

EN 13032-4:2015+A1:2019

Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires

31-12-2019

 

EN 16838:2019

Refrigerated display scooping cabinets and pozzetto for gelato - Classification, requirements, performance and energy consumption testing

31-01-2020

EN 16838:2016

EN 60317-35:2014/A1:2019

Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer

17-07-2022

 

EN 60335-1:2012/A14:2019

Household and similar electrical appliances - Safety - Part 1: General requirements

30-07-2021

 

EN 60335-1:2012/A2:2019

Household and similar electrical appliances - Safety - Part 1: General requirements

30-07-2021

 

EN 60335-2-12:2003/A11:2019

Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances

26-07-2022

 

EN 60335-2-12:2003/A2:2019

Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances

02-08-2022

 

EN 60335-2-13:2010/A1:2019

Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances

02-08-2022

 

EN 60335-2-66:2003/A11:2019

Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters

16-04-2022

 

EN 60335-2-84:2003/A2:2019

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets

05-07-2022

 

EN 60335-2-87:2002/A2:2019

Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal-stunning equipment

05-07-2022

 

EN 60335-2-98:2003/A11:2019

Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers

16-04-2022

 

EN 60704-3:2019

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values

02-07-2022

EN 60704-3:2006

EN 60947-5-4:2003/A1:2019

Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests

26-06-2022

 

EN 61000-3-3:2013/A1:2019

Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection

02-08-2022

 

EN IEC 55016-1-1:2019

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus

26-06-2022

EN 55016-1-1:2010
EN 55016-1-1:2010/A1:2010
EN 55016-1-1:2010/A2:2014

EN IEC 60068-2-82:2019

Environmental testing - Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronic assemblies

18-06-2022

EN 60068-2-82:2007

EN IEC 60076-22-2:2019

Power transformers - Part 22-2: Power transformer and reactor fittings - Removable radiators

28-06-2022

 

EN IEC 60086-4:2019

Primary batteries - Part 4: Safety of lithium batteries

30-05-2022

EN 60086-4:2015

EN IEC 60512-11-1:2019

Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence

20-06-2022

EN 60512-11-1:1999

EN IEC 60633:2019

High-voltage direct current (HVDC) transmission - Vocabulary

30-05-2022

EN 60633:1999
EN 60633:1999/A1:2009
EN 60633:1999/A2:2015

EN IEC 60704-2-16:2019

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-16: Particular requirements for washer-dryers

24-06-2022

 

EN IEC 60879:2019

Comfort fans and regulators for household and similar purposes - Methods for measuring performance

26-06-2022

 

EN IEC 61000-4-18:2019

Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test

20-06-2022

EN 61000-4-18:2007
EN 61000-4-18:2007/A1:2010
EN 61000-4-18:2007/corrigendum Sep. 2007

EN IEC 61131-10:2019

Programmable controllers - Part 10: PLC open XML exchange format

29-05-2022

 

EN IEC 61280-4-1:2019

Fibre-optic communication subsystem test procedures - Part 4-1: Installed cabling plant - Multimode attenuation measurement

26-06-2022

EN 61280-4-1:2009

EN IEC 61400-21-1:2019

Wind energy generation systems - Part 21-1: Measurement and assessment of electrical characteristics - Wind turbines

24-06-2022

 

EN IEC 61400-26-1:2019

Wind energy generation systems - Part 26-1: Availability for wind energy generation systems

03-07-2022

CLC/TS 61400-26-1:2017
CLC/TS 61400-26-2:2017
CLC/TS 61400-26-3:2017

EN IEC 61851-1:2019

Electric vehicle conductive charging system - Part 1: General requirements

05-07-2022

EN 61851-1:2011

EN IEC 61869-14:2019

Instrument transformers - Part 14: Additional requirements for current transformers for DC applications

05-07-2022

 

EN IEC 61869-15:2019

Instrument transformers - Part 15: Additional requirements for voltage transformers for DC applications

05-07-2022

 

EN IEC 61869-9:2019

Instrument transformers - Part 9: Digital interface for instrument transformers

05-07-2022

EN 60044-8:2002

EN IEC 62026-1:2019

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules

13-06-2022

EN 62026-1:2007

EN IEC 62040-1:2019

Uninterruptible power systems (UPS) - Part 1: Safety requirements

19-07-2022

EN 62040-1:2008
EN 62040-1:2008/A1:2013
EN 62040-1:2008/corrigendum Feb. 2009

EN IEC 62271-107:2019

High-voltage switchgear and controlgear - Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV

02-07-2022

EN 62271-107:2012

EN IEC 62386-104:2019

Digital addressable lighting interface - Part 104: General requirements - Wireless and alternative wired system components

24-06-2022

 

EN IEC 62677-3-103:2019

Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications

18-06-2022

 

EN IEC 62812:2019

Low resistance measurements - Methods and guidance

06-06-2022

 

EN IEC 62884-4:2019

Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 4: Short-term frequency stability test methods

10-06-2022

 

EN IEC 63128:2019

Lighting control interface for dimming - Analogue voltage dimming interface for electronic current sourcing controlgear

24-06-2022

 

EN IEC 63146:2019

LED packages for general lighting - Specification sheet

06-06-2022

 

HD 60364-8-2:2018/A11:2019

Low-voltage electrical installations - Part 8-2: Prosumer's low-voltage electrical installations

02-08-2022

 

 

 

Eurofins updates  


Top▲  

Opening of new Laboratory facilities in Rossens, Switzerland

 

Two new EMC chambers

 

Opening Event on 20th September 2019 to show the new 3m and 5m chamber to our customers.

Read more >>

 

New company name by 1st September 2019

 

Eurofins Electrosuisse Product Testing AG becomes Eurofins Electric & Electronic Product Testing AG

 

Eurofins Electric & Electronic Product Testing AG splits off from Electrosuisse completely.

Read more >>