Product Chemistry
Eurofins Agroscience Services offers a complete range of product chemistry testing including basic physico-chemical properties, studies relevant for environmental exposure and hazard / risk assessment, transport, user risk studies and shelf life of formulated products (OECD, EC directives, CIPAC methods).
We also provide analytical services for impurity profiling and 5-batch analysis (material accountability / change control / anti-counterfeighting) in close cooperation with our sponsors.
We have a wide spread experience with most types of formulations and actives and can offer these both as GLP as well as non-GLP. Climatic test chambers are available for studies at defined temperature and storage stabilities / shelf life studies, including large cooling chambers.
Studies are performed in line with Agrochemicals, Biocides, Chemicals, Animal Healthcare and Pharmaceutical regulations
Certification of Substances and formulated products
5 batch Analysis (material accountability / change control / anti-counterfeighting)
Storage stability studies
- 2 year shelf life specification at ambient (CRD and FAO/WHO)
- Cold storage stability (CRD and FAO/WHO)
- Freeze / thaw stability (CRD and FAO/WHO)
- Accelerated storage stability for 2 weeks at 54°C or other temperatures (CRD and FAO/WHO)
Physico-chemical properties (actives / formulated products)
- Melting point/melting range (OECD 102)
- Boiling point/boiling range (OECD 103)
- Density (OECD 109)
- Vapour pressure (OECD 104)
- Henry constant (calculation)
- pH (OECD 122)
- Physical state, colour and odour
- IR; NMR; GC/HPLC-MS; UV/VIS, ICP-MS
- Water solubility (OECD 105)
- Solubility in organic solvents (OECD 105)
- Partition coefficient
- Abiotic degradation / hydrolysis (OECD 111)
- Dissociation constant (OECD 112)
- Flammability (solids) (A.10 or UN-Test N.1)
- Flash point (liquids) (A.9)
- Flammability (solids) (A.10)
- Bowes-Cameron cage test (UN N.4)
- Explosive properties (A.14)
- Surface tension (A.5)
- Oxidizing properties of solids (A.17 or UN-Test O.1)
- Oxidizing properties of liquids (A.21 or UN-Test O.2)
- Pyrophoric properties of solids and liquids (A.13 or UN-Test N.1 / N.3)
- Particle size distribution by laser diffraction (CIPAC MT 187)
- Particle size distribution (CIPAC MT 170)
- Thermal stability (OECD 113)
- Adsorption/desorption (OECD 121)
- Auto-ignition temperatures of liquids or solids (A.15 or A.16)
- Acidity, alkalinity if pH is < 4 or >9 (OECD 122 / CIPAC MT 191)
- Viscosity (OECD 114 / CIPAC MT 192)
- Surface tension (A.5 / OECD 115)
- Tap density / bulk density (CIPAC MT 186)
- Wettability (CIPAC MT 53.3)
- Persistent foaming (CIPAC MT 47.3)
- Dispersibility of WG (CIPAC MT 174)
- Suspensibility (CIPAC MT 184)
- Spontaneity of dispersion (CIPAC MT 160)
- Wet sieve test (CIPAC MT 185)
- Dustiness (CIPAC MT 171)
- Friability and attrition characteristics (CIPAC MT 178)
- Friability of tablets (CIPAC MT 193) by using a Heubach Dustmeter
- Emulsion stability (MT 36.3 or MT 173)
- Flowability of WG after heat test under pressure (CIPAC MT 172)
- Pourability (CIPAC MT 148)
- Dilution stability of herbicide aqueous solution (CIPAC MT 41)
- Degree of dissolution and solution stability (CIPAC MT 179)
- Dispersion stability (CIPAC MT 180)
- Dissolution of water soluble bags (CIPAC MT 176)
- Seed treatment/ loading analysis/ distribution and flow
- Effectiveness of cleaning procedures
Further Information
For further details on the Product Chemistry Services portfolio, please email Rebecca Driesener or download our Chemistry services PDF as a general introduction.
